logo
Referenzen |
Startseite ProdukteEpoxid-AB-Kleber

Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

Alle Produkte

Epoxid-AB-Kleber

(103)

Geänderter Acrylkleber

(31)

Nicht mehr Nagel-Kleber

(17)

Kleber für Fadenverbindungen

(22)

Dichtungshersteller

(36)

502 Superklebstoff

(8)

Keramisches Fliesendichtungsmittel

(7)

Hardware Elektronischer Klebstoff

(14)

Kleber für Fahrzeuge

(14)

Kleber für Hausgeschäfte

(12)

Dekorationsmöbel Klebstoff

(7)
Ich bin online Chat Jetzt

Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications
Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

Großes Bild :  Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

Produktdetails:
Herkunftsort: Hunan, China
Markenname: DEYI
Modellnummer: DY E705
Zahlung und Versand AGB:
Min Bestellmenge: 2880
Kontakt

Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications

Beschreibung
Farbe: Schwarz & Weiß Komponente: 2 Komponenten
Mischverhältnis: 1: 1 Härtungszeit: 5 Minuten
Volle Aushärtungszeit: 24 Stunden Funktion: Bonding+Sealing
Haltbarkeit: 12 Monate Hauptmaterial: EPOXY
Viskosität: > 100000 CPS/25 ℃ Arbeitszeit: 5 Minuten (25 ℃/100 g)
Trockene Zeit der Note: 5-10 Minuten. Umschlagfestigkeit: ≥ 16 MPA
Wärmewiderstand: -60 bis +100 ℃ Verstärkte Farbe: helles Schwarzes
Verpackungsgröße: 47x46x35cm (20g/Karte)
Hervorheben:

Full Cure in 12 Hours Epoxy AB Glue

,

12 Months Shelf Life Epoxy Resin Adhesive

,

Water Resistant Two Component Epoxy

Factory Price 5 Minutes Epoxy Resin/Epoxy Adhesive AB Glue for Metal and Glass
Product Description
4-MIN EPOXY ADHESIVE is a high-performance adhesive for both household and industrial applications, offering superior bond strength for various materials.
Properties
  • Ideal for repairs and welds with superior bond strength
  • Bonds to metal, plastic, rubber, wood, ceramics, glass, and concrete
  • Resistant to acid, alkali, and oil
  • Non-flammable, non-shrinking, and waterproof
  • Creates metallic grey finish that can be filed, ground, and drilled
Applications
4-MIN EPOXY ADHESIVE is suitable for bonding and repairing in various industries including machinery, electronics, automobiles, shipbuilding, chemical industry, and handicrafts. It forms excellent bonds with metals, rubbers, leathers, and various plastics.
Directions
  • Clean substrate surface to remove contaminants like water, dust, and oil
  • Remove cap from tube and puncture seal
  • Mix part A and part B at 1:1 ratio until uniform color is achieved (use within 20 minutes)
  • Apply thin coat to both surfaces
  • No clamping needed - slight pressure during setting is sufficient
  • Note: Below 5℃ will extend curing time
Storage & Warnings
Storage:
  • Store in shady, dry, well-ventilated, damp-proof area
  • Keep at room temperature
  • Keep away from ignition sources
Warnings:
  • Irritating to skin and eyes
  • Keep out of reach of children
  • In case of contact, flush with water and seek medical attention if necessary
Technical Parameters
Color Cured Color Viscosity (CPS/25℃) Mixing Ratio Work Time (25℃/100g) Cure Time (25℃/100g) Lap Shear Strength (St-St) Heat Resistance (℃) Shelf Life (25℃)
A:black
B:milky white		 Light Black A:>100000
B:>100000		 1:1 5 Minutes Touch Dry: 5-10 Mins
Full cure: 12 hrs		 ≥16 MPa -60 to +100 12 months
Our Main Products
Packaging & Shipping
Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications 0
Packaging Shipping
A: 20g/card 24 cards/inner box 288 cards/ctn DIM:47x46x35cm
B: 80G/card 12 cards/inner box 144 cards/ctn DIM:68X37X35CM 		1. FOB Terms(FOB GUANGZHOU/SHANGHAI/CHANGSHA) or EX Works
2. Free sample available
3. 24 hours after-sale service
4. Customized design and branding available
Company Information
Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications 1 Fast Curing Epoxy AB Glue with Full Cure in 12 Hours and 12 Months Shelf Life for Water Resistant Industrial Applications 2
FAQ
Q1: Are you a factory or a trading company?
Of course, we are a Factory.
Q2: Can you provide the samples?
Yes, we can. The sample is free, and you only need bear the freight.
Q3: How long can I get sample?
The sample time is 5-7 days and express delivery usually needs 5-7 day.
Q4: Production period and delivery time?
3 days to 7 days.
Q5: What's your MOQ (min order quantity)?
Our MOQ is 3000 pairs.
Q6: How can you control of product quality?
We have experienced and skilled labors and QC team. Goods are 100% inspection before packing.

Größe und Tag:

Abklebstoff,

Ab Kleber,

ab Epoxidklebstoff

Kontaktdaten
Hunan Baxiongdi New Material Co., Ltd.

Ansprechpartner: SU

Telefon: 008615200906996

Faxen: 86-731-86677379

Senden Sie Ihre Anfrage direkt an uns (0 / 3000)

über

Epoxid-AB-Kleber

Superstarker Epoxidharzklebstoff für die Schweißgesundheit von Metallen

AB Epoxidhämmstoff klar und hitzebeständig für Hochtemperatur rostfreien Stahl

Profi-Epoxidharz-System 30 Minuten Härtungsverfahren Transparentes Klebstoff Epossidica

Geänderter Acrylkleber

5 Minuten Ersthärtung Modifizierter Acrylklebstoff für rote und grüne Oberflächen

Jt40 Acryl Modifiziert AB Acryl Klebstoff und grün durchsichtig mit Arbeitszeit 5min

Durchsichtiger modifizierter Acryl-AB-Kleber 5 Minuten Kleber für den täglichen Bedarf

NACHRICHT HINTERLASSEN

Datenschutz-Bestimmungen | China Gut Qualität Epoxid-AB-Kleber Fournisseur. © 2024 - 2025 Hunan Baxiongdi New Material Co., Ltd.. All Rights Reserved.