logo
Referenzen |
Startseite ProdukteEpoxid-AB-Kleber

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Alle Produkte

Epoxid-AB-Kleber

(118)

Geänderter Acrylkleber

(31)

Nicht mehr Nagel-Kleber

(17)

Kleber für Fadenverbindungen

(22)

Dichtungshersteller

(36)

502 Superklebstoff

(8)

Keramisches Fliesendichtungsmittel

(7)

Hardware Elektronischer Klebstoff

(14)

Kleber für Fahrzeuge

(14)

Kleber für Hausgeschäfte

(12)

Dekorationsmöbel Klebstoff

(7)
Ich bin online Chat Jetzt

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Großes Bild :  Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Produktdetails:
Herkunftsort: Hunan, China
Markenname: DEYI
Zahlung und Versand AGB:
Min Bestellmenge: 10000
Kontakt

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Beschreibung
Farbe: Klar Viskosität: > 100000 CPS/25 ℃
Mischungs-Verhältnis: 1: 1 Arbeitszeit: 20 Minuten
Trockene Zeit der Note: 30 Minuten Volle Heilzeit: 24 Stunden
Umschlagfestigkeit: ≥ 16 MPA Hitzebeständigkeit: -60 bis +100 ℃
Haltbarkeit: 12 Monate Hauptmaterial: Äthyl-Zyanidakrylat
Säurebeständigkeit: Ja Alkali -Widerstand: Ja
Ölwiderstand: Ja Wasserdicht: Ja
Nicht brennbar: Ja
Hervorheben:

Heat Resistant Epoxy AB Glue

,

Touch Dry in 30 Minutes Epoxy Resin Adhesive

,

Full Cure in 24 Hours Two-Component Epoxy

30 Minutes Epoxy Resin/Epoxy Adhesive AB Glue Black and White
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 0
DEYI-730 30 minutes epoxy resin/epoxy adhesive AB glue black and white
30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.
Technical Parameters
Color Viscosity (CPS/25℃) Mixture Work Time (25℃/100g) Cure Time (25℃/100g) Lap Shear Strength (St-St) Heat Resistance (℃) Shelf Life (25℃)
A:black A:>100000 1:1 20 Minutes Touch Dry:30 Mins ≥16 Mpa -60 to +100 12 months
B:milky white B:>100000 Full Cure: 24 hrs
Product Description
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 1 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 2 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 3 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 4
Storage & Warnings
Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.
Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
Directions
  • Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
  • Remove the cap from the tube and puncture the tubes.
  • Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
  • Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets.
  • If temperature is below 5℃, it will take a longer time to cure.
Cautions
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 5

Größe und Tag:

Abklebstoff,

Ab Kleber,

ab Epoxidklebstoff

Kontaktdaten
Hunan Baxiongdi New Material Co., Ltd.

Ansprechpartner: SU

Telefon: 008615200906996

Faxen: 86-731-86677379

Senden Sie Ihre Anfrage direkt an uns (0 / 3000)

über

Epoxid-AB-Kleber

Superstarker Epoxidharzklebstoff für die Schweißgesundheit von Metallen

AB Epoxidhämmstoff klar und hitzebeständig für Hochtemperatur rostfreien Stahl

Profi-Epoxidharz-System 30 Minuten Härtungsverfahren Transparentes Klebstoff Epossidica

Geänderter Acrylkleber

5 Minuten Ersthärtung Modifizierter Acrylklebstoff für rote und grüne Oberflächen

Jt40 Acryl Modifiziert AB Acryl Klebstoff und grün durchsichtig mit Arbeitszeit 5min

Durchsichtiger modifizierter Acryl-AB-Kleber 5 Minuten Kleber für den täglichen Bedarf

NACHRICHT HINTERLASSEN

Datenschutz-Bestimmungen | China Gut Qualität Epoxid-AB-Kleber Fournisseur. © 2024 - 2025 Hunan Baxiongdi New Material Co., Ltd.. All Rights Reserved.